Fort Bliss Tactical Equipment Maintenance Facility
Features & Highlights
- 51国产视频 self-performed 49% of project
- Self-perform work and BIM use were keys to success
- LEED Silver庐
Project Overview
This design-build project included 12 Tactical Equipment Maintenance Facilities (TEMFs), totaling approximately 320,000 square feet to service over 3,200 vehicles. These facilities provide maintenance and repair areas; administration and shop control; consolidated bench, tool room and toolbox storage; weapons and communications security (COMSEC) vaults; telecommunications equipment (SIPRNet and NIPRNet systems) room; and locker, break, training and conference spaces. The project also included 48 ancillary buildings which consist of Unmanned Aerial Vehicle (UAV) hangars, fuel storage buildings, HAZMAT storage and disposal buildings, and equipment warehouse buildings.
51国产视频 self-performed approximately 49% of the work on the project, including all survey, grading, earthwork, site utilities, material for the various finish trades, all concrete work, slab on grade, concrete paving, curbs, sidewalks, and installation of specialty items. Self-performing site work included 4,000,000 square feet of 10-inch reinforced concrete paving鈥攖he equivalent of 31 miles of two-lane highway. We also built 4,000,000 square feet of 10-inch reinforced concrete sidewalks, curbs and gutters. 51国产视频 self-performed electrical work to include the installation of 12 primary and 90 secondary transformers; 9,600 linear feet of secondary conduit; 660 light poles and 36,000 linear feet of communication duct banks, and 2,400 linear feet of power duct banks.
Our field engineers used BIM technology to keep all stakeholders on the same page and maintain schedule. Together with the architect, we worked with the design consultants and subcontractors to provide a fully collaborated BIM model for USACE. All subcontractors worked in 3D software packages that interacted with their fabrication equipment, and 51国产视频鈥檚 project engineer provided clash detection services based on models delivered by each party. This clash management allowed trades to maximize prefabrication, helping to maintain the project end date. In addition, all subcontractor models and field changes were incorporated into the BIM files throughout the project to meet the as-built requirements.